Starting procedure with the SmartKey
To start the engine using the SmartKey instead of KEYLESS-GO, pull the Start/ Stop button out of the ignition lock.
•► To start a gasoline engine: turn the SmartKey to position 3 in the ignition lock and release it as soon as the engine is running.
•► To start a diesel engine: turn the SmartKey to position 2 in the ignition lock.
The 
preglow indicator lamp in the
instrument cluster lights up.
•► When the 
preglow indicator lamp
goes out, turn the SmartKey to position 3 and release it as soon as the
engine is running.
You can start the engine without preglow if the engine is warm.
See also:
Active Blind Spot Assist
Important safety notes
Active Blind Spot Assist uses a radar sensor
system to monitor the side areas of your
vehicle which are in back of the driver. A
warning display in the exterior mirrors d ...
Direction of rotation
Tires with a specified direction of rotation have additional benefits, e.g. if
there is a risk of hydroplaning. You will only gain these benefits if the correct
direction of rotation is maintained ...
Making adjustments in 5 mph (Canada: 10 km/h) increments
Briefly press the cruise control
lever
beyond the pressure point, up 1 for a
higher speed or down 2 for a lower speed.
The last speed stored is increased or
reduced. ...