Activating/deactivating airrecirculation mode

You can deactivate the flow of fresh air if unpleasant odors are entering the vehicle from outside. The air already inside the vehicle will then be recirculated.

The operation of air-recirculation mode is the same for all control panels.

WARNING
Fogged windows impair visibility, endangering you and others. If the windows begin to fog on the inside, switching off the air recirculation mode immediately should clear interior window fogging. If interior window fogging persists, make sure the air conditioning is activated, or press thebutton. button.

http://strategic-human-resource.com/

•► Turn the SmartKey to position 2 in the ignition lock.

•► To activate: press the button. button.

The indicator lamp above the lights up. button lights up.

In the event of high pollution levels19 or at high outside temperatures, airrecirculation mode is automatically activated. When air-recirculation mode is activated automatically, the indicator lamp above the Outside air is added after about 30 button does not light up.

Outside air is added after about 30 minutes.

•► To switch off: press the button. button.

The indicator lamp above the goes out. button goes out.

Air-recirculation mode deactivates automatically:

 - after approximately five minutes if outside temperatures are less than about 41 °F (5 °C)

 - after approximately five minutes if cooling with air dehumidification is deactivated

 - after approximately 30 minutes if outside temperatures are over about 41 °F (5 °C)

    See also:

    Load index
    In addition to the load bearing index, the load index may also be imprinted on the sidewall of the tire. This specifies the load bearing capacity more precisely. ...

    Storing and maintaining the current speed
    You can store the current speed if you are driving faster than 20 mph (30 km/h). •► Accelerate the vehicle to the desired speed. •► Briefly press the cruise control lever up 1 or d ...

    Cleaning the seat belts
    Use clean, lukewarm water and soap solution. Do not clean the seat belts using chemical cleaning agents. Do not dry the seat belts by warming them above 176 ‡ (80 †) or placing them in dire ...