Defrosting the windshield

You can use this function to defrost the windshield or to defrost the inside of the windshield and the side windows.

You should only select the defrosting function until the windshield is clear again.

•► Turn the SmartKey to position 2 in the ignition lock.

•► To activate: press the button. button.

http://strategic-human-resource.com/

The indicator lamp above the lights up. button lights up.

The climate control system switches to the following functions:

 - cooling with air dehumidification on
 - high airflow
 - high temperature
 - air distribution to the windshield and front side windows
 - air-recirculation mode off

•► To switch off: press the button. button.

The indicator lamp above the goes out. The previously selected settings button goes out. The previously selected settings come into effect again. The cooling with air dehumidification function remains on. Airrecirculation mode remains deactivated.

or
 •►  Press the The indicator lamp above the  button button.

The indicator lamp above the goes out. Airflow and air distribution are set button goes out. Airflow and air distribution are set to automatic mode.

or

•►  Automatic climate control: press temperature button 9 or 12 up or down.

Automatic climate control: press temperature button 10 or 14 up or down.

or

•► Dual-zone automatic climate control: press switch 11 up or down.

3-zone automatic climate control: press button 12 up or down

    See also:

    Transmission position D with ECO start/stop function activated
    The ECO start/stop function switches the engine off automatically if the vehicle is braked to a standstill when in transmission position D and the brake is still depressed. For further informat ...

    Vehicles without extended Off-Road Proengineering package
    Basic setting The extent to which the vehicle is raised or lowered depends on the basic setting selected. Select: • Raised level, for driving on normal off-road terrain • Highway/high-speed ...

    Side marker lamps
    - Remove the cover in the front wheel arch. - Turn cap 2 counter-clockwise and remove it. - Pull out bulb holder 1. - Take the bulb out of bulb holder 1. - Insert the new bulb into bulb holder 1 ...