Notes on using dual-zone automatic climate control

The following contains notes and recommendations on optimum use of dualzone automatic climate control.

 - Activate climate control using the buttons. The indicator lamps above and the and buttons. The indicator lamps above the buttons light up. and  - Set the temperature to 72 °F (22 buttons light up.

mostbet mostbet mostbet

 - Set the temperature to 72 °F (22 °C).

 - Only use the "defrosting" function briefly until the windshield is clear again.

 - Only use "air-recirculation" mode briefly, e.g. if there are unpleasant outside odors or when in a tunnel. The windows could otherwise fog up as, in air-recirculation mode, no fresh air is drawn into the vehicle.

 - Use the ZONE function to adopt the temperature settings on the driver's side for the front-passenger side as well. The indicator lamp above the goes button goes out.

    See also:

    Problems with the cooling with air dehumidification function
    If you can no longer switch on the cooling with air dehumidification function via COMAND, the cooling with air dehumidification function is switched off due to a malfunction. Consult a qualifi ...

    Using KEYLESS-GO
    The KEYLESS-GO key must be outside the vehicle. All the doors must be closed. Touch recessed sensor surface 1 on the door handle until the side windows and the sliding sunroof or the panoram ...

    Engine oil
    Vehicles with a diesel particle filter: If the vehicle is mostly driven for short distances, it is possible that malfunctions may occur during the automatic cleaning of the diesel particle fil ...