Important safety notes

WARNING
Severe conditions (e.g. strong air pollution) may require replacement of the filter before its scheduled replacement interval. A clogged filter will reduce the air volume to the interior and the windows could fog up, impairing visibility and endangering you and others.

Have a blocked filter replaced at a Mercedes- Benz Center as soon as possible.

WARNING
Follow the recommended settings for heating and cooling given on the following pages.

Otherwise, the windows could fog up, impairing visibility and endangering you and others.

The automatic climate control adjusts the temperature and the humidity of the vehicle interior and filters undesired substances from the air.

The automatic climate control is only operational when the engine is running.15 Optimum operation is only achieved if you drive with the side windows and sliding sunroof/panorama roof with power tilt/ sliding panel closed.

Ventilate the vehicle for a brief period during warm weather, e.g. using the convenience opening feature (Y page 91).

This will speed up the cooling process and the desired vehicle interior temperature will be reached more quickly.

The integrated filter can filter out most particles of dust and completely filters out pollen. A clogged filter reduces the amount of air supplied to the vehicle interior. For this reason, you should always observe the interval for replacing the filter, which is specified in the Service Booklet. As it depends on environmental conditions, e.g.

heavy air pollution, the interval may be shorter than stated in the Service Booklet.

It is possible that the residual heat function may be activated automatically an hour after the SmartKey is removed. The vehicle is then ventilated for 30 minutes to dry the air-conditioning system.

    See also:

    Preparing the vehicle
    WARNING The wheel and tire size of the emergency spare wheel/spare wheel may differ to that of the damaged wheel. When using an emergency spare wheel/spare wheel the handling characteristics ...

    Deactivating the HOLD function
    The HOLD function is deactivated automatically if:  - you accelerate and the transmission is in position D or R.  - you shift the transmission to position P.  - you apply t ...

    Qualified specialist workshop
    An authorized Mercedes-Benz Center is a qualified specialist workshop. It has the necessary specialist knowledge, tools and qualifications to correctly carry out the work required on your vehi ...