Turn signal lamp (halogen headlamps)
Due to their location, have the bulbs in the left-hand headlamp changed at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center.
•► Switch off the lights.
•► Open the hood.
•► Turn bulb holder 1 counter-clockwise and pull it out.
•► Turn the bulb counter-clockwise, applying slight pressure, and remove it from bulb holder 1.
•► Insert the new bulb into bulb holder 1 and turn it clockwise.
•► Insert bulb holder 1 into the lamp and turn it clockwise.
See also:
Overview of Tire Quality Grading
Standards
The Uniform Tire Quality Grading is a U.S.
Government requirement. Their purpose is to
provide drivers with consistent and reliable
information regarding tire performance. Tire
manufacturer ...
Engaging the differential locks
Pull away slowly when the differential
locks are activated.
Function or performance tests may only be
performed on a 2-axle dynamometer. If you
wish to operate the vehicle on such a
dynamomet ...
General notes
USA only:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful
interference, and
2. this device must ...