Parking lamps/standing lamps (halogen headlamps)

•► Switch off the lights.

•► Switch off the lights.

•► Open the hood.

•► Turn housing cover 1 counter-clockwise and pull it out.

•► Pull out bulb holder 2.

•► Take the bulb out of bulb holder 2.

•► Insert the new bulb into bulb holder 2.

•► Insert bulb holder 2.

•► Align housing cover 1 and turn it clockwise until it engages.

    See also:

    Important safety notes
    WARNING In order to help prevent spilling liquids on vehicle occupants and/or vehicle equipment, only use containers that fit into the cup holder. Use lids on open containers and do not f ...

    Activation conditions
    You can activate the HOLD function if: • the vehicle is stationary. • the engine is running. • the driver's door is closed or your seat belt is fastened. • the parking brake is not applied. • the ...

    Important safety notes
    WARNING Grains of sand, particles of dirt and other abrasive materials can enter the brake system. This can lead to excessive wear and unpredictable braking efficiency. After the brakes have ...