Cornering light function
The cornering light function improves the illumination of the road over a wide angle in the direction you are turning, enabling better visibility in tight bends, for example. It can only be activated when the low-beam headlamps are switched on.
Active: if you are driving at speeds below 25 mph (40 km/h) and switch on the turn signals or turn the steering wheel.
Not active: if you are driving at speeds above 25 mph (40 km/h) or switch off the turn signal or turn the steering wheel to the straight-ahead position.
The cornering light function may remain lit for a short time, but is automatically switched off after no more than three minutes.
See also:
Important safety notes
WARNING
When opening or closing the door windows,
make sure that there is no danger of anyone
being harmed by the opening/closing
procedure.
The door windows are equipped with
automatic ope ...
High-beam flasher
•► To switch on: turn the SmartKey in the
ignition lock to position 1 or 2 or start the
engine.
•► Pull the combination switch in the direction
of arrow 3. ...
Entering an intermediate stop
Introduction
When route guidance is active, you can enter
an intermediate stop. Intermediate stops can
be predefined destinations from the following
categories that COMAND offers for selection: ...