Hazard warning lamps

The hazard warning lamps automatically

The hazard warning lamps automatically switch on if:

 - an air bag is deployed.
 - the vehicle is slowed down severely from a speed of over 45 mph(70 km/h) and comes to a halt.

•► To switch on the hazard warning lamps: press button 1.

All turn signals flash. If you now switch on a turn signal using the combination switch, only the turn signal lamp on the corresponding side of the vehicle will flash.

•► To switch off the hazard warning lamps: press button 1.

The hazard warning lamps are deactivated automatically if the vehicle returns to a speed of over 6 mph(10 km/h) after a full application of the brakes.

The hazard warning lamps still operate if the ignition is switched off.

    See also:

    Emergency Tensioning Devices, belt force limiters
    The front seat belts and the outer seat belts in the rear are equipped with ETDs and seat belt force limiters. The ETDs tighten the seat belts in an accident, pulling them close against the bod ...

    Installing the ball coupling
    WARNING If the vehicle/trailer combination is not secured, the trailer may come loose. As a result, you could cause an accident. Therefore, make sure that the ball coupling is secured with th ...

    Activating/deactivating PRE-SAFE® Brake
    PRE-SAFE® Brake is only available in vehicles with DISTRONIC PLUS. Press the or button on the steering wheel to select the DriveAssist menu. Press or to select PRE-SAFE Brake. Pres ...