High-beam headlamps
•► To switch on the high-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine.
•► Turn the light switch to 
or 
.
•► Press the combination switch beyond the pressure point in the direction of arrow 1.
In the position, the high-beam
headlamps are only switched on when it is
dark and the engine is running.
The 
indicator lamp in the
instrument
cluster lights up when the high-beam
headlamps are switched on.
•► To switch off the high-beam headlamps: move the combination switch back to its normal position.
The 
indicator lamp in the
instrument
cluster goes out.
See also:
Important safety notes
If a tire pressure monitor system is installed,
the vehicle's wheels have sensors that
monitor the tire pressures in all four tires. The
tire pressure monitor warns you if the
pressure drops i ...
Releasing the cargo net
Seat belt reel holder behind the front seats
► Pull belt adjuster 1 upwards in the
direction of the arrow to reduce the tension
on the tensioning strap.
► Unhook belt hook 2 from car ...
Activating with the current or last
stored speed
WARNING
The set speed stored in memory should only
be set again if prevailing road conditions and
legal speed limits permit. Possible
acceleration or deceleration differences
arising from re ...