Headlamp cleaning system
The headlamps are cleaned automatically if the "Wipe with washer fluid" function is operated ten times while the lights are on and the engine is running
See also:
Installing/removing the towing eye
Installing the towing eye
Vehicles with a trailer tow hitch: if possible
secure the towing device on the trailer tow
hitch.
► Remove the towing eye from the vehicle
tool kit.
WARNING&nbs ...
Low-beam headlamps
► To switch on the low-beam headlamps:
turn the SmartKey in the ignition lock to
position 2 or start the engine.
► Turn the light switch to
.
The indicator lamp in the
instru ...
Activating/deactivating the radar
sensor system
The following systems are switched off when
the radar sensor system is deactivated:
• DISTRONIC PLUS
• BAS PLUS
• PRE-SAFE® Brake
• Blind Spot Assist
• Active Blind Spot Assist
USA on ...
