Daytime running lamps
Daytime running lamps in Canada
The daytime running lamps function is required by law in Canada. It cannot therefore be deactivated.
•► Turn the light switch to or
.
With the engine running: depending on the ambient light, the daytime running lamps or the low-beam headlamps are switched on.
When the low-beam headlamps are
switched on, the indicator lamp in
the
instrument cluster lights up.
When the engine is running and the vehicle is stationary: if you move the selector lever from a drive position to P, the daytime running lamps/low-beam headlamps go out after three minutes.
When the engine is running, the vehicle is
stationary and in high ambient light
brightness: if you turn the light switch
to , the daytime running lamps and
the
parking lamps are switched on.
If the engine is running and you turn the light
switch to , the manual settings take
precedence over the daytime running lamps.
Daytime running lamps in the USA
In the USA, the daytime running lamps are deactivated upon delivery from the factory.
•► To activate the daytime running lamps: activate the daytime running lamps function in the on-board computer
•► Turn the light switch to or
.
With the engine running: depending on the ambient light, the daytime running lamps or the low-beam headlamps are switched on.
When the low-beam headlamps are
switched on, the indicator lamp in
the
instrument cluster lights up.
If the engine is running and you turn the light
switch to or
, the manual settings
take precedence over the daytime running
lamps.
See also:
Warranty
The Service and Warranty Information
booklet contains detailed information about
the warranties covering your vehicle.
Your authorized Mercedes-Benz Center will
exchange or repair any defective ...
Position of the steering wheel for
driving
The steering wheel is moved to the last selected position when:
- the driver's door is closed.
- you insert the SmartKey into the ignition lock.
or
- you press the Start/Stop button once on vehicl ...
Adjusting the sound settings
You can select the sound settings in the audio
CD/DVD/MP3, video DVD and AUX modes.
Switch on an audio operating mode (e.g. audio CD mode).
Select Treble or Bass using
the buttons on the remo ...