Low-beam headlamps

•► To switch on the low-beam headlamps:

turn the SmartKey in the ignition lock to position 2 or start the engine.

•► Turn the light switch to The  indicator lamp in the instrument.

The cluster lights up. indicator lamp in the instrument cluster lights up.

    See also:

    Storing and maintaining the current speed
    You can store the current speed if you are driving faster than 20 mph (30 km/h). •► Accelerate the vehicle to the desired speed. •► Briefly press the cruise control lever up 1 or d ...

    Setting the front-compartment temperature using the front control panel
    Turn the SmartKey to position 2 in the ignition lock. To increase/reduce: press the rocker switch up or down. Only change the temperature setting in small increments. Start at 72 °F (22 °C ...

    Important safety notes
    WARNING For safety reasons, switch off the windshield wipers and remove the key from the ignition lock before changing the wiper blades (vehicles with KEYLESS-GO: make sure that the on-bo ...