Operation
Depending on the date of manufacture of your
vehicle, the 
or
symbol for the
automatic headlamp mode/daytime running
lamps is located on the light switch.
Illustration: light switch with the
symbol for
the automatic headlamp mode/daytime running
lamps
1. 
Left-hand standing lamps
2. 
Right-hand standing lamps
3. 
Parking lamps, license plate
and
instrument cluster lighting
4. 
Automatic headlamp mode/daytime
running lamps
5. 
Low-beam/high-beam headlamps
6. 
Rear fog lamp
7. 
Front fog lamps
Illustration: light switch with the
symbol for
the automatic headlamp mode/daytime running
lamps
1. Left-hand standing lamps
2. Right-hand standing lamps
3. Parking lamps, license plate
and
instrument cluster lighting
4. Automatic headlamp
mode/daytime
running lamps
5. Low-beam/high-beam headlamps
6. Rear fog lamp
7. Front fog lamps
The turn signals, high-beam headlamps and the high-beam flasher are operated using the combination switch
Switch off the parking lamps and standing lamps when you leave the vehicle. This prevents the battery from discharging.
The exterior lighting (except the parking/ standing lamps) switches off automatically if you:
- remove the SmartKey from the ignition lock
- open the driver's door with the SmartKey
in position 0
If you hear a warning tone when you leave the vehicle, the lights may still be switched on.
•► Turn the light switch to or
.
See also:
Important safety notes
WARNING
To help avoid personal injury during a collision
or sudden maneuver, exercise care when
storing objects in the vehicle. Put luggage or
cargo in the trunk if possible.
Do not pile lug ...
TIREFIT kit version 1
► Open flap 2.
► Pull connector 5 with the cable and hose
6 out of the housing.
► Screw hose 6 onto flange 7 of tire
sealant bottle 1.
► Insert tire sealant bottle : hea ...
Removing/installing the headlamp cover
You must remove the headlamp cover in the engine compartment before you can replace
the bulbs in the headlamp.
To remove: press retaining clip 1 in the direction of the arrow.
Pull cover 2 f ...