Calling up a stored setting - Memory function - Seats, steering wheel and mirrors - Mercedes-Benz E-Class Sedan and Wagon Owners Manual - Mercedes-Benz E-Class | Mersag.com

Calling up a stored setting

Mercedes-Benz E-Class / Mercedes-Benz E-Class Sedan and Wagon Owners Manual / Seats, steering wheel and mirrors / Memory function / Calling up a stored setting

•► Press and hold the relevant storage position button 1, 2 or 3 until the seat, steering wheel and exterior mirrors are in the stored position.

The setting procedure is interrupted as soon as you release the storage position button.

See also:

Notes for 4MATIC vehicles
Vehicles with 4MATIC must not be towed with either the front or the rear axle raised, as doing so will damage the transmission. If the vehicle has transmission damage or damage to the front or ...

Problems with the seat heating
The seat heating has switched off prematurely or cannot be switched on. The vehicle's electrical system voltage is too low because too many electrical consumers are switched on. X Switch off ...

Switching on DISTRONIC PLUS, storing the current speed and maintaining it
Important safety notes WARNING The vehicle can be braked when DISTRONIC PLUS is activated. For this reason, deactivate DISTRONIC PLUS if the vehicle is to be set in motion by other means (e. ...