Calling up a stored parking position setting
•► Turn the SmartKey to position 2 in the
ignition lock.
•► Adjust the exterior mirror on the frontpassenger
side with the corresponding
button
•► Engage reverse gear.
The exterior mirror on the front-passenger side moves to the stored parking position.
The exterior mirror on the front-passenger side moves back to its original position:
- as soon as you exceed a speed of 6 mph
(10 km/h)
- about ten seconds after you have
disengaged reverse gear
- if you press button 1 for the exterior
mirror on the driver's side
See also:
Operating the on-board computer
The on-board computer is activated as soon
as you turn the SmartKey to position 2 in the
ignition lock.
You can control the multifunction display and
the settings in the on-board computer using ...
Opening the hood
WARNING
Do not pull the release lever while the vehicle
is in motion. Otherwise, the hood could be
forced open by passing air flow.
This could cause the hood to come loose and
injure ...
Active Blind Spot Assist
Important safety notes
Active Blind Spot Assist uses a radar sensor
system to monitor the side areas of your
vehicle which are in back of the driver. A
warning display in the exterior mirrors d ...