Switching on/off
The steering-wheel heating heats the leather areas of the steering wheel
•► Make sure that the SmartKey is in position 2 in the ignition lock.
•► To switch on/off: turn the lever in the direction of arrow 1 or 2.
Indicator lamp 3 lights up or goes out.
The steering wheel heating may switch off temporarily if:
- the temperature of the vehicle interior is
above 86 °F (30
°C).
- the temperature of the steering wheel is
above 95 °F (35
°C).
Indicator lamp 3 remains on.
Vehicles without KEYLESS-GO: when you remove the SmartKey from the ignition lock, the steering wheel heating is deactivated.
Vehicles with KEYLESS-GO: when you switch off the ignition and open the driver's door, the steering wheel heating is deactivated.
See also:
BAS PLUS (Brake Assist System Plus)
BAS PLUS is only available in vehicles
equipped with DISTRONIC PLUS.
Observe the "Important safety
notes"
section.
At speeds above approximately
20 mph (30 km/h), BAS PLUS assists ...
Cleaning the plastic trim
WARNING
When cleaning the steering wheel boss and
dashboard, do not use cockpit sprays or
cleaning agents containing solvents. Cleaning
agents containing solvents cause the surface
to become ...
The mbrace system
The mbrace system provides different
services, e.g.:
• automatic and manual emergency call
• Roadside Assistance call
• MB Info call
To adjust the volume during an mbrace call,
proceed a ...