Switching on/off

The three blue indicator lamps in the buttons indicate the ventilation level you have selected.

If the battery voltage is too low, the seat ventilation may switch off.

•► Make sure that the SmartKey is in position

•► Make sure that the SmartKey is in position 2 in the ignition lock.

•► To switch on: press button 1 repeatedly until the desired ventilation level is set.

You can open the side windows and the sliding sunroof using the "Convenience opening" feature. The seat ventilation of the driver's seat automatically switches to the highest level.

To switch off: press button 1 repeatedly until all the indicator lamps go out.

    See also:

    Important safety notes
    The rear view camera is an optical parking aid. It shows the area behind your vehicle in the COMAND display. WARNING Make sure that no persons or animals are in the maneuvering range. Otherwi ...

    Correct use of the seat belts
    WARNING USE SEAT BELTS PROPERLY • Seat belts can only work when used properly. Never wear seat belts in any other way than as described in this section, as that could result in serious injur ...

    Downhill gradients
    On long and steep gradients, you must reduce the load on the brakes by shifting early to a lower gear. This allows you to take advantage of the engine braking effect and helps avoid overh ...