Folding out the folding bench seat

•► Make sure that the backrests of the rear

•► Make sure that the backrests of the rear bench seat are locked in the upright position.

•► Move the handle for the combined cargo cover and net upwards.

•► Pull release handle 1 and fold the backrest of the folding bench seat upwards.

•► Hook the seat belts into retainers 3.

•► Hook the seat belts into retainers 3.

•► Pull release handle 2 and fold the folding bench seat cushion into the sitting position.

•► Push down the seat cushion until the backrest engages fully.

•► Fold the head restraints upwards.

    See also:

    Components and storage
    The EASY-PACK load-securing kit allows you to use your cargo compartment for a variety of purposes. The accessory parts are located under the trunk floor. – Open the trunk floor. EASY-PACK ...

    High-beam headlamps (halogen headlamps)
    - Switch off the lights. - Open the hood. - Turn housing cover 1 counter-clockwise and pull it out. - Pull lever 3 upwards and remove bulb holder 2. - Take the bulb out of bulb holder 2. - ...

    Automatic engine start
    The engine is started automatically if you: • release the brake pedal when HOLD is not activated and the transmission is in position D or N • shift the transmission to position R • depres ...