Resetting
Reset the sliding sunroof if it does not move smoothly.
•► Turn the SmartKey to position 2 in the ignition lock.
•► Raise the sliding sunroof fully at the rear.
•► Keep the
switch pressed for
another
second.
•► Make sure that the sliding sunroof can be fully opened and closed again.
•► If this is not the case, repeat the steps above again.
If the sliding sunroof still cannot be opened or closed fully after resetting, contact a qualified specialist workshop.
See also:
Overview
The on-board computer is activated as soon as you turn the SmartKey to position
1 in the ignition lock.
You can control the multifunction display and the settings in the on-board computer
using t ...
Important safety notes
WARNING
Severe conditions (e.g. strong air pollution)
may require replacement of the filter before
its scheduled replacement interval. A clogged
filter will reduce the air volume to the inter ...
High-beam flasher
► To switch on: turn the SmartKey in the
ignition lock to position 1 or 2 or start the
engine.
► Pull the combination switch in the
direction
of arrow 3. ...
