Resetting the side windows

You must reset each side window if a side window can no longer be closed fully.

Х► Close all the doors.

Х► Turn the SmartKey to position 1 or 2 in the ignition lock.

Х► Pull the corresponding switch on the door control panel until the side window is completely closed.

Х► Hold the switch for an additional second.

If the side window opens again slightly:

Х► Immediately pull the corresponding switch on the door control panel until the side window is completely closed.

Х► Hold the switch for an additional second.

Х► If the corresponding side window remains closed after the button has been released, the side window has been reset correctly.

If this is not the case, repeat the steps above again.

    See also:

    Activating/deactivating the rear view camera
    Ц To activate: make sure that the SmartKey is in position 2 in the ignition lock. Ц Make sure that the "rear view camera" function is selected in COMAND (see the separate operating in ...

    Checking the coolant level
    Only check the coolant level when the vehicle is on a level surface and the engine has cooled down. Turn the SmartKey to position 2 in the ignition lock. On vehicles with KEYLESS-GO, press the ...

    Guide lines in the COMAND display
    WARNING   Use of rear view camera can be dangerous if you are color-blind or have impaired color vision. Only use rear view camera if you can see and distinguish all colored guidelines ...