Using KEYLESS-GO
The KEYLESS-GO key must be outside the vehicle. All the doors must be closed.
•► Touch recessed sensor surface 1 on the door handle until the side windows and the sliding sunroof or the panorama roof with power tilt/sliding panel are fully closed.
Make sure you only touch recessed sensor surface 1.
•► Make sure that all the side windows and the sliding sunroof or panorama roof with power tilt/sliding panel are closed.
On vehicles with a panorama roof with power tilt/sliding panel:
•► Touch recessed sensor surface 1 on the door handle again until the roller sunblinds of the panorama roof with power tilt/ sliding panel close.
•► To interrupt convenience closing: release recessed sensor surface 1 on the door handle.
See also:
Installing the towing eye
Remove the towing eye from the vehicle
tool kit.
WARNING
The exhaust tail pipe may be hot. You could
burn yourself if you touch the tail pipe. Be
particularly careful when removing th ...
Display design
Your COMAND display features optimized
designs for operation during daytime and
night-time hours. You can customize the
design to suit your personal preferences by
manually selecting day or ni ...
Switching the front climate control on/off using the front control panel
Turn the SmartKey to position 2 in the
ignition lock.
To activate: press the
rocker switch
up or down.
The indicator lamp in the rocker switch
goes out. The previously selected settings
...