Using the SmartKey

The SmartKey must be close to the driver's door handle.

•► Point the tip of the SmartKey at the driver's door handle.

•► Press and hold the the button until the side windows and the sliding sunroof or the panorama roof with power tilt/sliding panel are fully closed.

•► Make sure that all the side windows and the sliding sunroof or panorama roof with power tilt/sliding panel are closed.

On vehicles with a panorama roof with power tilt/sliding panel:

•► Press and hold the until button again until the roller sunblinds of the panorama roof with power tilt/sliding panel close.

•► To interrupt convenience closing: release the Using KEYLESS-GO button.

    See also:

    Activating/deactivating
    Turn the SmartKey to position 2 in the ignition lock. To switch on: press the button. The indicator lamp in the button lights up. Airflow and air distribution are set to automatic mode. ...

    Removing the ball coupling
    – Remove the spring cotter. – Remove the bolt from the ball coupling recess. – Remove the ball coupling from the ball coupling recess. – Clean the ball coupling if it is dirty. Information on ...

    Opening and closing
    Overhead control panel 1 To open 2 To open 3 To close Turn the SmartKey to position 1 or 2 in the ignition lock. Press or pull the switch in the corresponding direction. If you press ...