Automatic locking feature
The vehicle locks automatically when the ignition is switched on and the wheels of the vehicle are turning at a speed of more than 9 mph (15 km/h).
You could therefore be locked out when:
- the vehicle is being pushed.
- the vehicle is being towed.
- the vehicle is being tested on a dynamometer.
•► To deactivate: press and hold button 1 for about five seconds until a tone sounds.
•► To activate: press and hold button 2 for about five seconds until a tone sounds.
i If you press one of the two buttons and do not hear a tone, the relevant setting has already been selected.
You can also switch the automatic locking function on and off using the on-board computer
See also:
Making adjustments in 5 mph (Canada:
10 km/h) increments
Briefly press the cruise control lever
beyond the pressure point, up 1 for a
higher speed or down 2 for a lower speed.
The last speed stored is increased or
reduced. ...
DEF
Important safety notes
For BlueTEC vehicles only.
DEF is a non-flammable, non-toxic, colorless,
odorless and water-soluble fluid.
Rinse surfaces that have come into
contact with DEF immediately ...
Range of the sensors
General notes
The sensors must be free of dirt, ice and
slush; otherwise they may not function
correctly. Clean the sensors regularly, taking
care not to scratch or damage them.
Side view
...