ATA (Anti-Theft Alarm system)

A visual and audible alarm is triggered if the alarm system is armed and you open:

- a door
- the vehicle with the mechanical key
- the trunk lid/tailgate
- the hood

The alarm is not switched off, even if you close the open door that has triggered it, for example.

If the alarm stays on for more than 30 seconds, the emergency call system mbrace (USA only) or TELE AID (Canada only) initiates a call to the Customer Assistance Center automatically. The emergency call system initiates the call provided that:

- you have subscribed to the mbrace/ TELE AID service.
- the mbrace/TELE AID service has been activated properly.
- the required mobile phone, power supply and GPS are available.

Х►  To arm: lock the vehicle with the SmartKey

Х► To arm: lock the vehicle with the SmartKey or KEYLESS-GO.

Indicator lamp 1 flashes. The alarm system is armed after approximately 15 seconds.

Х► To deactivate: unlock the vehicle with the SmartKey or KEYLESS-GO.

Х► To stop the alarm using the SmartKey: insert the SmartKey into the ignition lock.

The alarm is switched off.
or
Х► Press the button on the or SmartKey. button on the SmartKey.

The alarm is switched off.

Х► To stop the alarm using KEYLESS-GO: grasp the outside door handle. The SmartKey must be outside the vehicle.

The alarm is switched off.
or
Х► Press the Start/Stop button on the dashboard. The SmartKey must be inside the vehicle.

The alarm is switched off.

    See also:

    Changing the battery
    You require a CR 2025 3 V cell battery. Take the mechanical key out of the SmartKey. Press mechanical key 2 into the opening in the SmartKey in the direction of the arrow until battery tra ...

    Front air bags
    The front air bags increase protection for the driver's and front-passenger's head and chest. Driver's air bag 1 deploys in front of the steering wheel; front-passenger front air bag 2 depl ...

    Overview
    The on-board computer is activated as soon as you turn the SmartKey to position 1 in the ignition lock. You can control the multifunction display and the settings in the on-board computer using ...