M+S tires

At temperatures below 45 °F (+7 °C), use winter tires or all-season tires. Both types of tire are identified by the M+S marking.
Only winter tires bearing the snowflake snowflake symbol in addition to the M+S marking provide the best possible grip in wintry road conditions. Only these tires will allow driving safety systems such as ABS and ESP® to function optimally in winter. These tires have been developed specifically for driving in snow.
Use M+S tires of the same make and tread on all wheels to maintain safe handling characteristics.

WARNING
M+S tires with a tread depth of less than 1/6 inch (4 mm) must be replaced immediately. They are no longer suitable for use in winter.

Always observe the maximum permissible speed specified for the M+S tires you have mounted.

When you have mounted M+S tires:
  Vehicles for Canada: restart the tire pressure loss warning system.  Check the tire pressures.
  Vehicles for USA: restart the tire pressure monitor.  Vehicles for Canada: restart the tire pressure loss warning system.
WARNING  Vehicles for USA: restart the tire pressure monitor.

WARNING
If you use your spare wheel when M+S tires are mounted on the other wheels, be aware that the difference in tire characteristics impairs cornering ability and reduces driving stability. Adapt your driving style accordingly.
Have the spare wheel replaced by a normal wheel with an M+S tire at the nearest Mercedes-Benz Center.

    See also:

    "Minispare" emergency spare wheel
    The "Minispare" emergency spare wheel can be found in the stowage well under the cargo compartment floor. ► Lift the cargo compartment floor up. ► Take out the jack. ...

    Notes on audio AUX mode
    You can connect an external audio source (AUX) to COMAND. The socket for this is located in the glove box. If COMAND is equipped with a Media Interface, external audio sources are connected u ...

    Activating/deactivating the trunk lid opening height restriction
    To activate/deactivate the trunk lid opening height restriction: select Vehicle in the main function bar by sliding and turning the COMAND controller and press to confirm. The main are ...