Floormat on the driver's side

WARNING
Whenever you are using a floormat, make sure there is enough clearance and that the floormat is securely fastened.
The floormat should always be securely fastened using the fastening equipment.
Before driving off, check that the floormat is securely in place and adjust it if necessary. A loose floormat could slip and hinder proper functioning of the pedals.
Do not place several floormats on top of each other as this may impair pedal movement.

Slide the seat backwards.

To install: place the Slide the seat backwards.
floormat in the To install: place the floormat in the footwell.
To remove: pull the floormat Press studs 1 onto retainers 2.
off To remove: pull the floormat off retainers 2.
Maintenance and care Remove the floormat.

    See also:

    Changing the settings of the locking system
    You can change the setting of the locking system in such a way that only the driver's door and the fuel filler flap are unlocked. This is useful if you frequently travel on your own. - To chang ...

    Parking the vehicle for a long period
    If you leave the vehicle parked for longer than four weeks, the battery may be damaged by exhaustive discharge. Connect a trickle charger. You can obtain information about trickle chargers ...

    Overview: changing bulbs/bulb types
    You can change the following bulbs. The bulb type can be found in the legend. Halogen headlamps 1 Low-beam headlamp: H7 55 W 2 High-beam headlamp: H7 55 W 3 Parking lamp/standing lamp: W 5 W 4 ...