Seat belt
Problem | Possible causes/consequences and Solutions |
After starting the engine, the red seat belt warning lamp lights up for six seconds. |
The seat belt warning lamp reminds the driver and front passenger
to fasten their seat belts. Fasten your seat belt |
After starting the engine, the red seat belt warning lamp lights up. In addition, a warning tone sounds for up to six seconds. |
Risk of injury
The driver's seat belt is not fastened. |
The red seat belt warning lamp lights up after the engine starts, as soon as the driver's or the front-passenger door is closed. |
Risk of injury
The driver or front passenger has not fastened their seat belt. |
Risk of injury
There are objects on the front-passenger seat. |
|
The red seat belt warning lamp flashes and an intermittent audible warning sounds. |
Risk of injury
The driver or front passenger has not fastened their seat belt. In
addition, you are driving faster than 15 mph (25 km/h) or you have
briefly driven faster than 15 mph (25 km/h). |
Risk of injury
There are objects on the front-passenger seat. In addition, you are
driving faster than 15 mph (25 km/h) or you have briefly driven
faster than 15 mph (25 km/h). |
See also:
Problems with the SmartKey
Problem
Possible causes/consequences and
Solutions
You cannot lock or unlock the vehicle using the
SmartKey.
The SmartKey battery is discharged or nearly discharged.
- ...
introduction
You can establish a Bluetooth® connection to
COMAND (see the separate operating
instructions).
WARNING
A driver's attention to the road must always
be his/her primary focus when driving. F ...
Swiveling the COMAND display and setting the brightness
You can swivel the COMAND display. The
buttons are located beside the COMAND
display.
Swiveling
Swiveling
1 To swivel the display to the left
2 To swivel the display to the right
Setting ...