Resetting to factory settings

For safety reasons, the Day Lights function in the Lights submenu is only reset when the vehicle is stationary.

or Press the button on the or steering wheel to select the Settings button on the steering wheel to select the Settings menu.
or Press the button to select the or Factory Setting submenu. button to select the Factory Setting submenu.
button to confirm. Press the The Reset All Settings? message button to confirm.
The Reset All Settings? message appears.
or Press the button to select or No or Yes. button to select No or Yes.
button to confirm the Press the selection. button to confirm the selection.
If you select Yes, the multifunction display shows a confirmation message.

    See also:

    Brake lamp
    - Switch off the lights. - Open the cargo compartment. - Open the service flap. 1 Brake lamp - Turn the bulb holder counter-clockwise and remove it. - Remove the bulb from the bulb holder. - I ...

    Changing the settings of the locking system
    You can change the setting of the locking system in such a way that only the driver's door and the fuel filler flap are unlocked. This is useful if you frequently travel on your own. - To chang ...

    Rolling with the engine switched off
    WARNING There is no power assistance for the steering and the brake when the engine is not running. Steering and braking requires significantly more effort and you could lose control of the ...