Activating/deactivating PRE-SAFE® Brake

PRE-SAFE® Brake is only available in vehicles with DISTRONIC PLUS.

or Press the button on the or steering wheel to select the DriveAssist button on the steering wheel to select the DriveAssist menu.
or Press to select PRE-SAFE or Brake. to select PRE-SAFE Brake.
. Press The current selection is displayed..
The current selection is displayed.
press To activate/deactivate: press again. again.

When PRE-SAFE® Brake is activated, the multifunction display shows the function is not activated. symbol as long as the HOLD function is not activated.

Vehicles with Parking Guidance: if PARKTRONIC is activated and you are driving at a speed under 22 mph (35 km/h) the symbol for Parking Guidance is displayed symbol for Parking Guidance is displayed instead of the Activating/deactivating ATTENTION ASSIST symbol.

    See also:

    Opening and closing the side trim panels
    You must open the side trim panel in the cargo compartment before you can change the bulbs in the tail lamps. Left-hand side trim panel Right-hand side trim panel To open: turn release kno ...

    Adjusting the rear seat electrically
    You can only adjust the outer seats in the rear electrically. 1 Seat cushion angle 2 Backrest angle 3 Folding the head restraint up or back 4 Head restraint angle 5 Seat fore-and-aft ...

    High-beam headlamps
    To switch on the high-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine. Turn the light switch to . Press the combination switch beyond the pressure p ...