DISTRONIC PLUS displays in the multifunction display

General notes

You can select the distance display in the Assistance menu of the onboard computer.

Display when DISTRONIC PLUS is deactivated

function Select the Distance Display function using the on-board computer.

When DISTRONIC PLUS is deactivated, you will see the following in the multifunction display:

1 Symbol for activated PRE-SAFE® Brake

1 Symbol for activated PRE-SAFE® Brake
2 Vehicle in front, if detected
3 Distance indicator, current distance to the vehicle in front
4 Specified minimum distance to the vehicle in front; adjustable
5 Own vehicle

Display when DISTRONIC PLUS is activated

function Select the Distance Display function using the on-board computer.

You will see the stored speed for about five seconds when you activate DISTRONIC PLUS.

After this time, you will see the following in the multifunction display while DISTRONIC PLUS is activated:

1 DISTRONIC PLUS activated

1 DISTRONIC PLUS activated
2 Own vehicle
3 Specified minimum distance to the vehicle in front; adjustable
4 Vehicle in front, if detected

    See also:

    RACETIMER
    Displaying and starting RACETIMER WARNING The RACETIMER feature is only for use on roads and in conditions where high speed driving is permitted. Racing on public roads is prohibited under ...

    Rear fog lamp
    - To switch on the rear fog lamp: turn the SmartKey in the ignition lock to position 2 or start the engine. - Turn the light switch to or or . If the light switch is set to or , the rear ...

    Call priority
    When service calls are active, e.g. Roadside Assistance or MB Info calls, an emergency call can still be initiated. In this case, an emergency call will take priority and override all other ac ...