Storing the current speed or calling up a stored speed

WARNING
The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising from returning to the preset speed could cause an accident and/or serious injury to you and others.

lever towards you 4. Briefly pull the cruise control lever towards you 4.
accelerator pedal. Remove your foot from the accelerator pedal.
DISTRONIC PLUS is activated. The first time it is activated, the current speed is stored. Otherwise, it sets the vehicle cruise speed to the previously stored value.

    See also:

    Deactivating/activating ESP®
    WARNING Under no circumstances should you deactivate ESP® when the ESP® warning lamp in the instrument cluster flashes. Proceed as follows: • when driving off, apply as little throttle as p ...

    Problems with the steering wheel heating
    The steering wheel heating has switched off prematurely or cannot be switched on. The vehicle's electrical system voltage is too low because too many electrical consumers are switched on. - S ...

    Setting the front-compartment airflow using the front control panel
    You can select different airflow settings for the driver's and front-passenger sides as well as for the rear compartment. You can also use COMAND to set the airflow. Turn the SmartKey to positi ...