SmartKey
SmartKey
0 To remove the SmartKey
Vehicles with automatic transmission: shift the transmission to position P
1 Power supply for some consumers, such as the windshield wipers
2 Ignition (power supply for all consumers) and drive position
3 To start the engine
If the SmartKey is in position 0 in the ignition lock for an extended period of time, it can no longer be turned in the ignition lock. The steering is then locked. To unlock, remove the SmartKey and reinsert it into the ignition lock.
The steering is locked when you remove the SmartKey from the ignition lock.
The SmartKey can be turned in
the
ignition lock even if it is not the correct
SmartKey for the vehicle. The ignition is not
switched on. The engine cannot be started.
See also:
Treadwear indicators
Narrow bars (tread wear bars) that are
distributed over the tire tread. If the tire tread
is level with the bars, the wear limit of 1/16 in
(1.6 mm) has been reached. ...
Basic telephone menu (Bluetooth® interface)
To call up the telephone menu: press the
function button once or twice.
If the mobile phone is ready for use, the
following display appears:
Example display: telephone basic menu (Bluetooth® ...
Rear-view mirror
Rear-view mirror (manual anti-glare)
anti-glare mode: flick
anti-glare switch 1 forwards or back. ...