Cornering light function (Bi-Xenon headlamps)

Cornering light function (Bi-Xenon headlamps)
Cornering light function (Bi-Xenon headlamps)

Open the hood. Switch off the lights.
Turn housing cover 1 Open the hood.
counter-clockwise and pull it out. Turn housing cover 1 counter-clockwise and pull it out.
counter-clockwise and pull it out. Turn bulb holder 2 counter-clockwise and pull it out.
2. Take the bulb out of bulb holder 2.
holder 2. Insert the new bulb into bulb holder 2.
and turn it clockwise. Insert bulb holder 2 into the lamp and turn it clockwise.
clockwise until it engages. Align housing cover 1 and turn it clockwise until it engages.

    See also:

    Blind Spot Assist
    Important safety notes Blind Spot Assist uses a radar sensor system to monitor the areas on both sides of your vehicle. It supports you from speeds of approximately 20 mph (30 km/h). A warning ...

    Panic alarm
    ► To activate: press button 1 for at least one second. An alarm sounds and the exterior lighting flashes. ► To deactivate: press button 1 again. or ► Insert the SmartKe ...

    Important information
    The cooling with air dehumidification function is only available when the engine is running. The air inside the vehicle is cooled and dehumidified according to the temperature selected. WARNI ...