Storing settings

With the memory function, you can store up to three different settings, e.g. for three different people.

The following settings are stored as a single memory preset:
• position of the seat, backrest and head restraint
• driver's side: steering wheel position
• driver's side: position of the exterior mirrors on the driver's and front-passenger sides

WARNING
Do not activate the memory function while driving. Activating the memory function while driving could cause the driver to lose control of the vehicle.

Adjust the seat.

On the driver's side, adjust the Adjust the seat.
steering wheel and the exterior mirrors. On the driver's side, adjust the steering wheel and the exterior mirrors.
one of the storage position buttons 1, 2 or 3 within three Press memory button M and one of the storage position buttons 1, 2 or 3 within three seconds.
The settings are stored in the selected preset position. A tone sounds when the settings have been completed.

    See also:

    Limited braking performance on salt treated roads
    WARNING The layer of salt on the brake discs and the brake pads/linings may cause a delay in the braking effect, resulting in a significantly longer braking distance, which could lead to an ...

    Please bear the following in mind
    For safety reasons, Mercedes-Benz recommends that you only use Tires and wheels which have been approved by Mercedes-Benz specifically for your vehicle. These tires have been specially a ...

    Useful information
    This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific diffe ...