Calling up a stored parking position setting
Turn the SmartKey to position
2 in the
ignition lock.
Adjust the exterior mirror on the
frontpassenger
side with the corresponding
button.
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger side moves back to its original
position:
• as soon as you exceed a speed of 6 mph
• about ten seconds after you have disengaged reverse gear
• if you press button 1 for the exterior mirror on the driver's side
See also:
Closing the hood
WARNING
When closing the hood, use extreme caution
not to catch hands or fingers. Be careful that
you do not close the hood on anyone.
Make sure the hood is securely engaged
before driving ...
Important safety notes
WARNING
Do not turn off the engine before the vehicle
has come to a complete stop. With the engine
not running, there is no power assistance for
the brake and steering systems. In this case, ...
GAWR (Gross Axle Weight Rating)
The GAWR is the maximum permissible axle
weight. The actual load on an axle must never
exceed the gross axle weight rating. The
gross axle weight rating can be found on the
vehicle identificat ...
