Switching on/off

The three blue indicator lamps in the buttons indicate the ventilation level you have selected.

low, the seat If the battery voltage is too low, the seat ventilation may switch off.

Make sure that the SmartKey is

in position 2 in the ignition lock. Make sure that the SmartKey is in position 2 in the ignition lock.
repeatedly until the desired ventilation level is set. To switch on: press button 1 repeatedly until the desired ventilation level is set.

and the You can open the side windows and the sliding sunroof using the "Convenience opening" feature. The seat ventilation of the driver's seat automatically switches to the highest level.

button 1 repeatedly To switch off: press button 1 repeatedly until all the indicator lamps go out.

    See also:

    Storing the current speed or calling up the last stored speed
    WARNING The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising from re ...

    Useful information
    This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differenc ...

    Preparing the vehicle
    Your vehicle may be equipped with a "Minispare" emergency spare wheel or MOExtended tires (tires with run-flat properties). Vehicle preparation is not necessary on vehicles with MO ...