Problems with the side windows

Problem: a side window cannot be closed because it is blocked by objects, e.g.

leaves in the window guide.

Close the side window. Remove the objects.
Problem: a side window cannot be closed Close the side window.

Problem: a side window cannot be closed and you cannot see the cause.

WARNING
Closing the side windows with increased force or without the anti-entrapment feature could lead to serious or even fatal injury. Make sure that nobody can become trapped when closing the side windows.

If a side window is obstructed during closing and reopens again slightly:
blocks, pull the corresponding switch again until the side window has closed. Immediately after the window blocks, pull the corresponding switch again until the side window has closed.
The side window is closed with increased force.

If a side window is obstructed again during closing and reopens again slightly:
blocks, pull the corresponding switch again until the side window has closed. Immediately after the window blocks, pull the corresponding switch again until the side window has closed.
The side window is closed without the antientrapment feature.

WARNING
Pulling and holding the switch to close the door window immediately after it had been blocked two times will cause the door window to close without the anti-entrapment feature for as long as you hold the switch.

    See also:

    Switching the belt adjustment on/off
    For further information on belt adjustment. Press the or button on the steering wheel to select the Settings menu. Press the or button to select Belt Adjustment. Press the button to ...

    Important safety notes
    WARNING When leaving the vehicle, always remove the SmartKey from the ignition lock. Always take the SmartKey with you and lock the vehicle. Do not leave children unsupervised in the vehicle, ...

    Showing the map data version
    To show the menu: press the COMAND controller. Select Navi in the main function bar by sliding and turning the COMAND controller and press to confirm. Select Map Version and press ...