Using the SmartKey
The SmartKey must be close to
the
driver's door handle.
Point the tip of the SmartKey at
the driver's door handle.
Press and hold the
button until the side windows and
the sliding sunroof or the panorama roof with power tilt/sliding panel are fully
closed.
Make sure that all the side windows
and the sliding sunroof or panorama roof with power tilt/sliding panel are
closed.
On vehicles with a panorama roof with power tilt/sliding panel:
Press and hold the
button again until the roller
sunblinds of the panorama roof with power tilt/sliding panel close.
To interrupt convenience
closing: release the
button.
See also:
SmartKey
Display messages
Possible causes/consequences and •► Solutions
Key Does Not
Belong to Vehicle
You have put the wrong SmartKey in the ignition lock.
•► Use the correct ...
Tire characteristics
Tire data is vehicle-specific and may
deviate from the data in the example.
This information describes the tire cord and
the number of layers in sidewall 1 and under
the tread 2. ...
Overview
The on-board computer is activated as soon
as you turn the SmartKey to position 1 in the
ignition lock.
You can control the multifunction display and
the settings in the on-board computer using ...