Removing a wheel
– Unscrew the uppermost wheel bolt
completely.
– Screw alignment bolt 1 into the thread
instead of the wheel bolt.
– Unscrew the remaining wheel bolts fully.
Do not place wheel bolts in sand or on a
dirty surface. The bolt and wheel hub
threads could otherwise be damaged when
you screw them in.
– Remove the wheel.
See also:
Deactivating DISTRONIC
There are several ways to deactivate
DISTRONIC:
► Briefly press the cruise control lever
forwards 1.
or
► Brake.
The last speed stored remains stored until
you switch off the ...
AMG high-performance and ceramic
brakes
WARNING
New vehicle brake pads and discs, and
replacement brake pads and discs may take
several hundred miles of driving until they
provide optimum braking efficiency. Until that
time, yo ...
EBD (electronic brake force
distribution)
Observe the "Important safety
notes"
section.
EBD monitors and controls the brake
pressure on the rear wheels to improve
driving stability while braking.
WARNING
If EBD has malf ...