Cleaning the trailer tow hitch

The ball coupling must be cleaned if it becomes dirty or corroded.

– Remove rust on the ball of the ball coupling, e.g. with a wire brush.
– Remove dirt with a clean, lint-free cloth or a brush.
– After cleaning, lightly grease the ball of the ball coupling again.
– Check that the vehicle's trailer tow hitch is working properly.

Observe the note on care provided by the Observe the note on care provided by the trailer manufacturer.

You can also have the maintenance work You can also have the maintenance work on the ball coupling and the trailer tow hitch carried out by a qualified specialist workshop.

Environmental note
Dispose of rags soaked in oil and grease in an environmentally responsible manner.

    See also:

    Switching traffic reports on/off
    To switch on: set the route type to Dynamic Route. To switch off: select the Fast Route or Short Route route type. COMAND calculates a new route if you change the route type setting with ro ...

    Deactivating/activating PARKTRONIC
    1. To deactivate/activate PARKTRONIC 2. Indicator lamp If indicator lamp ; lights up, PARKTRONIC is deactivated. PARKTRONIC is automatically activated when you turn the SmartKey to positio ...

    Limited braking performance on salttreated roads
    WARNING The layer of salt on the brake discs and the brake pads/linings may cause a delay in the braking effect, resulting in a significantly longer braking distance, which could lead to an ...