Vehicle

Activating/deactivating the automatic door locking feature

If you select the Automatic Door Lock:

function, the vehicle is centrally locked above a speed of around 9 mph (15 km/h).

For further information on the automatic For further information on the automatic locking feature.

– Press the button on the or steering wheel to select the Settings button on the steering wheel to select the Settings menu.

– Press the button to select the or Vehicle submenu. button to select the Vehicle submenu.

– Press the – Press the or button to confirm.

– Press the button to select the or Automatic Door Lock function. button to select the Automatic Door Lock function.

You will see the selected setting: Enabled or Disabled.

– Press the setting. button to save the setting.

Activating/deactivating the acoustic locking verification signal

If you switch on the Acoustic Lock feedback function, an acoustic signal sounds when you lock the vehicle.

– Press the button on the or steering wheel to select the Settings button on the steering wheel to select the Settings menu.

– Press the button to select the or Vehicle submenu. button to select the Vehicle submenu.

– Press the – Press the or button to confirm.

– Press the button to select the or Acoustic Lock feedback: function. button to select the Acoustic Lock feedback: function.

You will see the selected setting: On or Off.

– Press the setting. button to save the setting.

Activating/deactivating the radar sensor system

The following systems are switched off when the radar sensor system is deactivated:
- DISTRONIC PLUS
- BAS PLUS
- PRE-SAFE® Brake
- Blind Spot Assist
- Active Blind Spot Assist

USA only: This device has been approved USA only: This device has been approved by the FCC as a "Vehicular Radar System".
The radar sensor is intended for use in an automotive radar system only. Removal, tampering, or altering of the device will void any warranties, and is not permitted by the FCC. Do not tamper with, alter, or use in any non-approved way.
Any unauthorized modification to this device could void the user's authority to operate the equipment.

Canada only: Canada only:
This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
Any unauthorized modification to this device could void the user's authority to operate the equipment.

– Press the button on the or steering wheel to select the Settings button on the steering wheel to select the Settings menu.
– Press the button to select the or Vehicle submenu. button to select the Vehicle submenu.
– Press the – Press the or button to confirm.
– Press the button to select or Radar Sensor (See Oper. Manual):. button to select Radar Sensor (See Oper. Manual):.
You will see the selected setting: Enabled or Disabled.
– Press the setting. button to save the setting.

    See also:

    Clearing the memory of the integrated garage door opener on the rear-view mirror
    X Turn the SmartKey to position 2 in the ignition lock. X Press and hold transmitter buttons 2 and 4 for approximately 20 seconds until indicator lamp 1 flashes rapidly. The memory is cleared. ...

    Connecting an external device
    Do not leave external devices in the vehicle as extreme temperatures (e.g. direct sunlight or extremely low outside temperatures) could cause them to malfunction (see the operating instructions ...

    Collision warning
    If a vehicle is detected in the monitoring range of Blind Spot Assist and you switch on the turn signal, a double warning tone sounds. Red warning lamp 1 flashes. If the turn signal remains on, de ...