Activating/deactivating Lane Keeping Assist

You can use the Lane Keep. Asst. function to activate/deactivate Lane Keeping Assist (Y page 200) or Active Lane Keeping Assist.

– Press the button on the or steering wheel to select the DriveAssist button on the steering wheel to select the DriveAssist menu.
– Press the button to select or Lane Keep. Asst.. button to select Lane Keep. Asst..
– Press The current selection is displayed..
The current selection is displayed.
– Press the – Press the or button to confirm.
– Press the button to set Off, or Standard or Adaptive. button to set Off, Standard or Adaptive.
– Press the setting. button to save the setting.

If Lane Keeping Assist or Active Lane keeping Assist is activated, the multifunction display shows the is symbol when the ignition is switched on.

    See also:

    Calling up a stored setting
    ► Press and hold the relevant storage position button 1, 2 or 3 until the seat, steering wheel and exterior mirrors are in the stored position. The setting procedure is interrupted as soon ...

    Opening and closing
    Overhead control panel 1 To open 2 To open 3 To close Turn the SmartKey to position 1 or 2 in the ignition lock. Press or pull the switch in the corresponding direction. If you press ...

    Lane Keeping Assist
    Important safety notes Lane Keeping Assist monitors the area in front of your vehicle by means of a camera at the top of the windshield. Lane Keeping Assist detects lane markings on the road an ...