Problems with Night View Assist Plus
| Problem | Possible causes/consequences and
 Solutions |
| The picture quality of Night View Assist Plus has deteriorated. | The windshield wipers are smearing the windshield. – Replace the wiper blades. |
| The windshield is smeared after the vehicle has been cleaned in a
car wash. – Clean the windshield. |
|
| There is windshield chip damage in the camera's field of vision. – Replace the windshield. |
|
| The windshield is fogged up on the inside. – Defrost the windshield. |
|
| The windshield is iced up. – De-ice the windshield. |
|
| There is dirt on the inside of the windshield. – Clean the inside of the windshield. |
See also:
Xenon bulbs
If your vehicle is equipped with Xenon bulbs,
you can recognize this by the following: the
cone of light from the Xenon bulbs moves
from the top to the bottom and back again
when you start the ...
Important safety notes
WARNING
Inhalation of exhaust gas is hazardous to your
health. All exhaust gas contains carbon
monoxide (CO), and inhaling it can cause
unconsciousness and possible death.
Do not run the e ...
Step-by-step instructions
The following steps have been developed as
required of all manufacturers under Title 49,
Code of U.S. Federal Regulations, Part 575
pursuant to the "National Traffic and Motor
Vehicle Safety ...