Starting procedure with the SmartKey
- To start a gasoline engine: turn the
SmartKey to position 3 in the ignition lock
and release it as soon as the
engine is running.
- To start a diesel engine: turn the
SmartKey to position 2 in the ignition lock.
The 
preglow indicator lamp in the
instrument cluster lights up.
- When the 
preglow indicator lamp
goes out, turn the SmartKey to position 3
and release it as soon as the
engine is running.
You can start the engine without preglow
if the engine is warm.
You can also use the touch-start function.
To do this, turn the SmartKey to position 3
and release it immediately.
The engine then starts automatically.
See also:
Tires
30 Use of snow chains not permitted. Observe the notes in the "Snow chains"
section.
31 MOExtended tires (tires featuring run-flat characteristics) only in
combination with an a ...
Detaching and storing the cargo net
Detach guide rod 2 from bracket 1 ().
Press the red button on the upper and lower guide rods.
Fold the cargo net and roll it up.
Close the two Velcro fasteners on the cargo net holder.
...
Setting the time
Select Vehicle in the main function bar by
turning the COMAND controller and
press to confirm.
Select System by turning the
COMAND controller and press to
confirm.
Select Time by ...