Replacing the rear window wiper blade

Removing the wiper blade

The wiper arm could be set in motion and WARNING
The wiper arm could be set in motion and injure you if the wiper is switched on.
Remove the key from the ignition lock before replacing the wiper blade.

- Remove the SmartKey from the ignition

- Remove the SmartKey from the ignition lock.
- Fold wiper arm 1 away from the rear window until it engages.
- Position wiper blade 2 at a right angle to wiper arm 1.
- Hold wiper arm 1 and press wiper blade 2 in the direction of the arrow until it releases.
- Remove wiper blade 2.

Installing the wiper blade

- Place new wiper blade 2 onto wiper arm 1.

- Hold wiper arm 1 and press wiper blade 2 in the opposite direction to the arrow until it engages.

- Make sure that wiper blade 2 is seated correctly.

- Position wiper blade 2 parallel to wiper arm 1.

- Fold wiper arm 1 back onto the rear window.

    See also:

    Introduction
    COMAND automatically stores the previous destinations for which the route calculation has been started. If the memory is full, COMAND deletes the oldest destination. You can also save a destin ...

    Activating/deactivating
    Turn the SmartKey to position 2 in the ignition lock. To switch on: press the button. The indicator lamp in the button lights up. Airflow and air distribution are set to automatic mode. ...

    Checking tire pressure electronically
    Make sure that the SmartKey is in position 2 () in the ignition lock. Press the or button on the steering wheel to select the Service menu. Press the or button to select Tire Pres ...