Switching the rear window wiper on/off

Combination switch
Combination switch

1 2 To wipe with washer fluid Rear window wiper switch
2 3 To switch on intermittent To wipe with washer fluid
3 wiping To switch on intermittent wiping
4 wiping To switch off intermittent wiping
5 – Turn the SmartKey to position 1 or 2 in the To wipe with washer fluid

– Turn the SmartKey to position 1 or 2 in the ignition lock.
– Slide switch 1 on the combination switch up or down to the appropriate position.

When the rear window wiper is switched on, the icon appears in the instrument cluster.

    See also:

    GAWR (Gross Axle Weight Rating)
    The GAWR is the maximum permissible axle weight. The actual load on an axle must never exceed the gross axle weight rating. The gross axle weight rating can be found on the vehicle identificat ...

    Important safety notes
    If a tire pressure monitor system is installed, the vehicle's wheels have sensors that monitor the tire pressures in all four tires. The tire pressure monitor warns you when the pressure drops ...

    SmartKey
    Display messages Possible causes/consequences and Solutions You have put the wrong SmartKey in the ignition lock. – Use the correct SmartKey. The Sma ...