High-beam headlamps (halogen headlamps)

- Switch off the lights.

- Switch off the lights.
- Open the hood.
- Turn housing cover 1 counter-clockwise and pull it out.
- Pull lever 3 upwards and remove bulb holder 2.
- Take the bulb out of bulb holder 2.
- Insert the new bulb into bulb holder 2.
- Simultaneously press bulb holder 2 and pull lever 3 downwards.
- Align housing cover 1 and turn it clockwise until it engages.

    See also:

    Introduction
    In the DriveAssist. menu you can: • show the distance display • activate/deactivate ESP® • activate/deactivate PRE-SAFE® Brake • activate/deactivate ATTENTION ASSIST • activate/deactivate Blind ...

    The windshield wipers are inoperative
    The windshield wiper drive is malfunctioning. Select another wiper speed on the combination switch. Have the windshield wipers checked at a qualified specialist workshop. ...

    Activating/deactivating the radar sensor system
    The following systems are switched off when the radar sensor system is deactivated: • DISTRONIC PLUS • BAS PLUS • PRE-SAFE® Brake • Blind Spot Assist • Active Blind Spot Assist USA on ...