Removing and installing the cover in the front wheel arch

You must remove the cover from the front wheel housing before you can change the front bulbs.

- To remove: switch off the lights.

- To remove: switch off the lights.
- Turn the front wheels inwards.
- Slide up cover 1  and lift it out.
- To install: insert cover 1 again and slide it downwards until it engages.

    See also:

    DOT, Tire Identification Number (TIN)
    U.S. tire regulations prescribe that every manufacturer of new tires or retreader has to imprint a TIN in or on the sidewall of each tire produced. The TIN is a unique identification number. ...

    Brow of hill
    When driving up an uphill gradient, slightly reduce pressure on the accelerator immediately before reaching the brow of the hill. Use the vehicle's own impetus to drive over the top of the hil ...

    Opening and closing the side trim panels
    You must open the side trim panel in the cargo compartment before you can change the bulbs in the tail lamps. Left-hand side trim panel Right-hand side trim panel To open: turn release kno ...