Position of the steering wheel for driving
The steering wheel is moved to the last selected position when:
- the driver's door is closed.
- you insert the SmartKey into the ignition lock.
or
- you press the Start/Stop button once on vehicles with KEYLESS-GO.
When you close the driver's door with the ignition switched on, the steering wheel is also automatically moved to the previously set position.
The last position of the steering wheel is stored when you switch off the ignition or when you store the setting with the memory function.
See also:
2008 Mercedes-Benz C-Class Review
One thing before reading on: Please put down the voodoo dolls and stickpins.
The vehicle tested this week gets less than 30 m.p.g. highway, has no
batteries hidden under the rear seat and will co ...
Checking the oil level using the onboard
computer
On vehicles with a 12-cylinder engine, the oil
level can be checked using the on-board
computer. On all other models, the dipstick
must be used to check the engine oil level.
Park the vehicle ...
Tire pressure of at least 180 kPa(1.8 bar/26 psi) is not reached
If, after five minutes, a pressure of 180 kPa
(1.8 bar/26 psi) has not been achieved:
► Press the on/off switch on the tire
inflation
compressor to 0.
The tire inflation compressor is ...